Resilience — Damage functions
The vulnerability curve behind every Direct Physical Loss figure, hazard by hazard: what each curve reads on its x-axis, which published method it implements, and which parameters remain a Darwin choice. Every figure is drawn from the shipped engine.
Resilience — Damage functions
A damage function is the bridge between a hazard's intensity at a site and the share of value lost. It is the one piece of the Direct Physical Loss chain that carries the physics, and the piece most worth reading before quoting a number.
These figures are the shipped curves, not illustrations. Each one is drawn from the same payload the production engine emits — the pure functions that score a real site, exported and plotted without being re-implemented. A curve cannot drift from the code that runs it.
How to read a figure
- Two channels, never on the same axes. Property damage is a share of asset value; business interruption is a share of one year's revenue. They are different denominators, so they get different panels.
- One line per asset group. Site types whose curve is identical are merged into one series; the legend lists the members. A hazard that harms a warehouse and an office differently shows two lines.
- Steps, not ramps, on the ordinal hazards. The geotechnical trio and drought round their input to a class and read a lookup table. They are drawn as one flat step per class, because a swept line would render the rounding boundaries as if they were physics.
- Conditional, not annualised. Every curve gives the loss given that the event occurs. The Average Annual Loss integrates it over how often events of each size happen, and is one to two orders of magnitude smaller.
Built and proposal
Each hazard carries a tag. Built means a published curve runs end to end. Proposal means at least one link in the chain is a first-cut Darwin form, so the hazard can be excluded from a strictly-calibrated total. The tag sits on the weakest link, not on the whole chain.
| Built | Proposal |
|---|---|
| Flood · Cyclone · Earthquake · Hail · Wildfire · Extreme heat | Extreme precipitation · Landslide · Clay shrink-swell · Subsidence · Drought |
A named public method is the curve, not the whole model. On top of each published curve sit Darwin choices: the per-asset vulnerability tiers, the thresholds, the defaults. They are stated per hazard below, so a reader can see exactly where the literature stops.
Water
Flood
Water depth inside the building, above the ground floor, on both channels. Flood splits by source — fluvial (river) and coastal (surge and sea-level rise) — and the two feed the same depth→loss curve, because vulnerability is depth-driven, not source-driven.
| Intensity axis | Water depth above ground floor (m) |
| Property damage | JRC continental depth–damage — Huizinga, de Moel & Szewczyk (2017), EUR 28552 |
| Business interruption | HAZUS Flood Model depth-band loss-of-use (downtime days / 365) |
| Darwin's part | The JRC occupancy assigned to each SiteType; the FLOPROS truncation and its conservatism knob |
The curve is continent-specific: the JRC report calibrates its shape per continent, because construction standards and building stock differ, so the same depth destroys a different share.
Business interruption is a coarse step in depth rather than a smooth ramp, so a baseline-to-horizon delta on this channel is zero unless the flood crosses a band.
Extreme precipitation
Pluvial damage — waterlogging, ingress, erosion, scour — once a storm exceeds what the local drainage was built for.
| Intensity axis | 5-day precipitation (mm), against the local drainage design storm |
| Both channels | Cubic-in-excess loss × pluvial-exposure tier; business interruption is loss-of-use on the resulting damage ratio |
| Darwin's part | The curve shape and the exposure tiers — this hazard is a proposal |
The axis is deliberately not absolute millimetres. Drainage is dimensioned to the local climate, so an absolute-mm curve would assert that wet climates are permanently destroyed. Capacity is the baseline return level at the EN 752 design standard, so a site whose drainage matches its own climate reads zero however wet that climate is — only the intensification is priced.
Wind & storm
Cyclone
| Intensity axis | 10-minute sustained wind (km/h on the figure; m/s in the engine) |
| Property damage | Emanuel (2011) cubic excess-wind |
| Business interruption | Loss-of-use on the wind loss ratio |
| Darwin's part | The V_half vulnerability tier per asset type; the gust conversion applied to coastal assets |
Hail
| Intensity axis | Hail diameter (mm) |
| Property damage | Schmid (2024) cubic size-to-loss |
| Business interruption | Hail-specific — component repair and lost solar generation, not the shared HAZUS relation |
| Darwin's part | The crop and hail-robust classes are Darwin reconstructions |
Heat & dryness
Extreme heat
Heat never touches the asset; it throttles the people working on it. This is a business-interruption-only hazard.
| Intensity axis | Design air temperature (°C), at 50 % relative humidity |
| Business interruption | ILO / Kjellström work-capacity loss on WBGT |
| Darwin's part | The air-temperature→WBGT bridge; the work-intensity tier per asset type; the air-conditioning gate |
Air-conditioned or unmanned sites — offices, data centres, shops, transport — are gated to zero. The channel prices outdoor and non-conditioned labour productivity, not cooling cost or equipment stress.
Drought / water stress
Also business-interruption only: drought starves output, it does not destroy the building.
| Intensity axis | WRI Aqueduct 4.0 water-stress score (0–5) |
| Business interruption | Shortfall per score × water-dependence tier, on the FAO-33 / van Vliet (2016) form |
| Darwin's part | The per-score loss rates and the dependence tiers — this hazard is a proposal |
This is the only hazard that reads a figure the site declares about itself: where water indicators (m³/yr) are reported, the categorical tier is replaced by a quantitative water-criticality.
Wildfire
| Intensity axis | Fire Weather Index (FWI) |
| Property damage | FireLossRate — Nicoletta (2023) / Abo El Ezz (2022), on the Van Wagner (1987) FWI→fireline-intensity relation |
| Business interruption | Loss-of-use on the material loss ratio |
| Darwin's part | The wildland-urban-interface tier → distance-to-fuel map |
Van Wagner defines the FWI as a numerical rating of fireline intensity, so the bridge from fire weather to fire intensity is published rather than fitted. Two caveats travel with it: the intensity is that of the Canadian system's standard reference fuel, not the site's own; and it is anchored on an ignition floor at FWI 10.
The business-interruption channel is weak on forests, and we say so. A managed forest maps to the agriculture occupancy, whose loss-of-use relation tops out at 24 days — so even a total burn prices at about 4.6 % of a year's revenue, less than an office would lose, because an office carries a longer commercial rebuild. Mechanically faithful to the model, physically debatable. The property channel is unaffected.
Ground
Earthquake
| Intensity axis | Peak ground acceleration (g) |
| Property damage | HAZUS lognormal fragility curves (FEMA), collapsed to a mean damage ratio |
| Business interruption | Shared HAZUS loss-of-use on that ratio |
| Darwin's part | The structural class assigned to each asset type |
Earthquake is time-invariant: no scenario moves the hazard, so its delta to baseline is zero by construction and only its level carries information.
The geotechnical trio
Landslide, clay shrink-swell and subsidence share one functional form — an ordinal susceptibility class read from a published map, scaled by a ground-vulnerability tier from the asset type, and multiplied by a trigger borrowed from a hazard already modelled.
| Hazard | Susceptibility layer | Trigger |
|---|---|---|
| Landslide | NASA global landslide susceptibility, classes 0–5 | Extreme precipitation, on absolute rainfall |
| Clay shrink-swell | Expansive soils, classes 1–3 | Dryness of the driest month |
| Subsidence | Herrera-García et al. global subsidence, classes 1–6 | None — groundwater-driven and largely time-invariant |
Read this before quoting a geotechnical figure. The published anchor sits on the hazard side — the three susceptibility maps and the trigger inputs. The class→loss tables, the ground-vulnerability tiers and the activation rates are Darwin's, which makes this the only family whose loss side is not carried by a published curve. One exception: the landslide class→loss shape is measured, as a frequency ratio of rainfall-triggered events in the NASA Global Landslide Catalog against the layer itself. A frequency ratio fixes the shape, not the absolute scale.
Regenerating these figures
Every figure on this page comes from one generator reading the engine's own exported curves, so refreshing them after a curve change is a single command rather than a redraw. The published figures are reproduced byte-for-byte on an unchanged payload, which means a visible diff is always a curve that actually moved.